The polishing pad can be used again if you clean it after use.
Clean immediately after use, and it will be easier to clean!
” WPG Sander Light Mutifuction Polisher Machine ” can be used with felt-bonded Foam Pad!
Spray wax remover and release car wax from pads
You can spray a little wax remover on the polishing sponge.
Or use soap to smear the surface of the polishing sponge.
(Recommended: German Dalli soap, which has strong cleaning power and does not hurt your hands).
Put the wax side of the sponge down, soak it in water.
And then gently squeeze the sponge with your hands to release the car wax from the sponge.
Note: It is recommended to wear gloves to protect the skin of the hands.
Scrub The Pad And Let It Air Dry
Under running water, rub the two polishing sponges with each other to ensure that the particles or dirt on the surface of the sponges are removed.
If the residual wax on the sponge is too difficult to remove, soak the sponge in the wax remover diluent.
And then wash it thoroughly with water the next day.
Reminder: squeeze the sponge by hand to drain, do not twist the waxed sponge by wringing it out, to avoid deformation and damage of the sponge.
After cleaning the sponge, place it in a ventilated place and let it dry naturally.
Reminder: Sun exposure is not recommended. Because it may cause the sponge to harden, which will cause the paint to be easily scratched during use!
If the residual car wax emerges from the surface of the sponge the next day after cleaning, please clean it again.
The polishing sponge is cleaned and can be used again.
But it is a consumable item.
If it is really dirty and cannot be cleaned, it should be replaced!
# How To Clean Polishing Pads ? # How To Clean Buffing Pads ? # How To Clean Foam Polishing Pads ?
# How To Clean A Buffer Pad ? # How To Clean A Buffing Pad ?