User Guides

Learning how to use "Schnee-leopard"

雪豹智能電動無線清潔打蠟機_正面

還沒登入延長保固期限嗎?

How to Use

Please charge Scrubber before first use. USB charging cable needs 5 hours and Quick charger needs 1.3 hours.
Please follow the steps below,

雪豹智能電動無線清潔打蠟機_USB充電器燈號_EN

Step 1.

Charge till the indicator of charge cable turns green.

白色斷電塞

Step 2.

Unplug Switch-off plug.

黑色防水塞

Step 3.

Insert Waterproof Plug into the charging inlet to prevent water seeping.

啟動開關

Step 4.

Press Start-up Button to start up.

切換轉速

Step 5.

Press Speed Button to change rotating speed.

白色斷電塞

Step 6.

Insert Switch-off Plug after use to extend the batter life.

Light & Ergonomic Design.
Easy To Use.

Hold the center of the main body in your palm and press the start-up button with the second knuckle of your thumb for easy scrubbing and waxing.

雪豹建議握法

Accessories Guides

*Please ensure to place Attachment at the center of Backing Plate to avoid scratching the cleaned objects.
*Such as 3-inch Backing Plate must be used with 4-inch Polishing Pad, 4-inch Scouring Disc, 3-inch sandpaper, and 3-inch Melamine sponge, etc.
*4-inch Backing Plate must be used with 4-inch sandpaper and 5-inch Scouring disc.

雪豹智能電動無線清潔打蠟機_自黏盤與耗材搭配_EN

Trouble Shooting

When light Indicator flash or shut down automatically, following conditions are what may be the cause.

省電模式

Power-saving Mode

If Scrubber is not used for over 2 minutes, it will power off automatically to save battery power.

低電量提醒

Low Battery Reminding

Indicator starts flashing from around low 1/5 of battery. Light Indicator will flashing till battery runs out.

切換轉速

Adjusting Speeds

Press Speed Button during operation to change rotating speed.
(Red: 150rpm / Orange: 100rpm / Green: 50rpm)

轉速記憶

Speed Memory

After Scrubber not being used over 2 minutes, just turn it off and on again. Its speed will runs the same as it was selected before.

過壓提醒

Over-press Warning

When rotating speed unstable and different light colors flashing, it indicates the press is overloading. Please reduce pressing force or change the rotating speed to ensure its best efficiency.

過熱保護

Overheat Protection & Motor Jam Protection

If it runs in overheat, light Indicator will be flashing. Please wait till internal temperature drops and light Indicator stops flashing. / If it stops rotating suddenly and light Indicator keeps flashing, its motor may be jammed. Please insert back Switch-off Plug before removing foreign object.

Want to learn more about Schnee-leopard’s expertise? → Click here

Maintenance

Careful maintenance can extend the service life of Schnee-leopard.

置於陰涼處

Daily Storage

After using, please insert Switch-off Plug to extend the battery life. Do not long-term store it in the car or high temperature environment above 122°F (50°C).

傳動軸擦潤滑油

Daily Maintenance

The motor transmission shaft hole and the screw joint of accessories can be wiped with lubricant to avoid rust.

主機清潔

Daily Cleaning

Please use clean cloth with neutral detergent to clean off the body simply. Do not use corrosive cleaning agents.

FAQs

Manual

FAQs

Manual

Do you have any questions about usage? Contact us